2017年7月30日星期日

Analysis of trivalent chromium using in PCB electroplating

There are still many weakness of trivalent chromium electroplating , such as unstable plating, sensitivity to impurity, high cost, dark color of film and so on. These must be consider except especially in the following aspects.

1. Difficulty in thickening of plating.
The thickness of trivalent chromium plating just be few microns normally, it only apply to ornamental plating. This is mainly due to that the electroplating condition being change as the time of electroplating. During electroplating, cathode current density and the time could be controlled, while the solution PH and temperature does not. So the solution PH and temperature are the main reason why the plating can not be thickened.

2. Difficulty in anode choosing.
Because of unstable plating and sensitivity to impurity, the solubility material usually can’t be chosen for anode. But trivalent chromium is easy to be oxidized to hexavalent chromium by the insolubility anode .It cause the plating change accelerates. At present, the study about trivalent chromium in China almost use the graphite as anode. The following is the graphite’s disadvantage:

(1). The electrode being oxidized to carbon dioxide because that the unstable in the bath solution.
(2). The plating solution could be polluted by the carbon residue which from the anode collapsing
(3). After oxidizing, anode thinning causes that the internal resistance rises and the distance between anode and cathode increases.

3. Complicated solution composition.
Domestic scholars proposed a new electroplating system—Oxalic acid salt – ethylenediamine tetraacetic acid system. It’s a complicated formula of the system, with the disadvantages such as small range of the temperature and current density, the graphite anode. During the actual process, it is difficulty to management and maintenance due to complicated composition.

Analysis of three reasons for PCB copper rejection

In terms of PCB copper loss (also often said that the rejection of copper) defect, PCB plant says that this is caused by bear and asks for compensation. According to years experience in dealing with customer complaints, common reasons of PCB copper rejection are the following:


1. PCB factory process factors:
(a)copper etched over, electrolytic copper foil used on the market generally sided galvanized steel (commonly known as ash foil) and single-sided copper (commonly known as the red of the foil), a common rejection of copper is generally above 70um copper galvanized foil, foil and 18um reddening following ashing foil basic none appeared bulk of the rejection of copper. Customer circuit design is better than etching line, if the copper foil after the specification change and etch parameters unchanged, resulting in a copper foil in the etching solution too long the residence time. Zinc was originally due to active metal, copper on the PCB when a long soak in the etching solution, will lead the line side excessive erosion, causing some of the fine line backing zinc layer is completely reacted with the substrate detachment, namely copper off. Another case is PCB etching parameters is no problem, but after etching poor washing and drying, resulting in a copper etching solution also will face surrounded PCB residues in untreated for a long time, will produce excessive side etching copper rejection of copper. This is usually expressed as concentrated in a thin line on the road, or a period of wet weather, the entire PCB will appear similar to the bad, look at it with the grass roots ripping copper contact surface (the so-called rough surface) color has changed, normal copper color is not the same, see the bottom of the original copper color, thick line at the copper peel strength is also normal.

(b)collision occurs locally PCB process, copper wire by external mechanical forces from the substrate. This poor performance is poor positioning or fixed directional, there will be significant copper twisted off, or the same direction to scratch / impact marks. Look at the copper foil peel bad hair surface, you can see the color of copper matte is normal, there will be no adverse side etching, copper peel strength is normal.

(c)PCBA circuit design is unreasonable, meticulous design with thick copper lines, can also cause excessive rejection lines etched copper.

2. the laminate manufacturing process reasons:

Under normal circumstances, as long as the laminate after hot pressing high temperature section over 30min, copper foil and the prepreg is substantially completely the binding, so nip generally will not affect the binding force of the copper foil laminate and the substrate. However, with the laminate stack, the stacking process, if PP contamination, or damage to the matte side of the copper foil will lead to insufficient adhesion after lamination of the copper foil and the substrate, resulting in the positioning (only for large plate words) or sporadic copper off, but near the copper peel strength measured off-line will not be an exception.

3. the laminate material reasons:
(a) the above mentioned are ordinary electrolytic copper foil hair galvanized or copper-treated products, if the hair foil production peak is abnormal, or zinc / copper, the coating dendrites bad, causing copper itself peel strength is not enough, the poor material made of pressed board after the foil off PCB will take place at the electronics factory plug-in, copper by external shocks. Such rejection of copper foil hair look bad ripping copper surface (ie, contact with the substrate surface) is not obvious side after pitting, but the entire surface of the copper foil peel strength will be poor.

(b) the copper foil and resin poor adaptability: some special properties of the laminate are now used, such as HTg sheet, because the resin system is not the same, the curing agent is generally used PN resin, a simple resin molecular chain structure, upon curing a low degree of crosslinking, is bound to use a special foil peak match. When the production of laminates using the copper foil and the resin system does not match, causing the sheet metal-clad peel strength is not enough, there will be bad when copper plug off.

8 Double-Checks before PCB Prototypes

Regarding PCB prototypes, there are two groups involved. One is engineers and the other is PCB prototype manufacturer. Engineers have to think about: 1)carefully selecting prototype quantities in order to save cost. 2)specifically confirming component package methods in avoidance of failed prototype caused by wrong package. 3)thoroughly checking electricity conduction to improve. 4)configuring complete signals to reduce noise in purpose of stabilities. PCB prototype manufacturers have to concern about: 1)seriously checking PCB files exactly correct. 2)completely verifying manufacturing process in compliance with manufacturer work flows. 3)controlling manufacturing quantities to save cost and ensure quality. 4)communicating with customer to prevent any risk during the manufacturing courses in advance.

7.26-Copper-Replacing-Copper.jpg

Methods and Steps
1. Material: first up, clearly state what material will be used for PCB manufacturing. The common type is FR4.
2. Layer: display PCB layers
3. Solder mask color: select according to requirements, generally green.
4. Silk color: comments on font size and color on PCB sides, generally white.
5. Copper thickness: usually calculate according to PCB designed current. Thicker, better, but it will cost more. So a balance should be thought.
6. Via overlays solder mask: make vias to insulation.
7. Surface finish: such as HASL, immersion gold
8. Quantities: clear remarks of PCB quantities to produce.

6 Untapped Sales Thoughts Before Starting Your Business

If you don’t know how to sell, starting your own business must be a risk thing. How opportunity comes? It is actually driven by customer demands. As long as we can keenly look into customer demands and then think about how to notify the customers and convey excellent experiences, profits come subsequently.

003.jpg

In terms of sales, many guys think more complexly. In summary, you have to remember only 3 words: pain spot, tickle spot and excitement spot. Let us see simply definitions.
1.    Pain spot
What problems customer has, which makes him sleepless and annoying. These pain spots are what we should solve for customer.

2.    Tickle spot
Uncomfortable factors making customer in a dilemma. Customer needs somebody to scratch the tickle.

3.    Excitement spot
The excitement that makes customer shout “WOW” and stay in pleasure.

How are 6 cases to impress you. Hope you can be inspired through them.
ONE: Accurate Customer
Taxi driver is easily afflicted with hemorrhoids due to sitting for long time. If we can push audio or text advertisement of hemorrhoids drug by using taxi App under the downtown district, this is absolutely accurate marketing. It is said that there are 5 people replying to one message. When you pay no attention to this, others have been doing for long.
[Tips] Beyond surface, we can find taxi drivers’ pains such as hemorrhoids, lumbar disease and then dig customer demands for making a deal.

TWO: Increase Profits
You are shopping apples and asking “how much?”
Seller: “$1 USD for this stack”.
You: “How about apples on the other side?”
Seller: “$1.5 USD”.
You: “Why it’s more expensive?”
Seller: “Looks better”.
You decided to buy apples on price $1.5USD.
Afterwards, seller divided the apples as 2 stacks and sold them on price $1.5USD very soon.
[Tips] This is customer excitement spot. When you have only one price, customer decides to buy or not; When you have two prices, customer decides to buy the good or better. Actually, more customers buy better commodities, which will directly increase your profits.

THREE: Promote Customer Repeat Purchase
A fine menswear shop launched member service of dry cleaning of the clothes for FREE every month. Regular member: 1 time/month; Silver member: 2 times/month; Golden member: 3 times/month. The amazing happened. Customers will take their clothes to the shop for dry cleaning and look around new arrivals while waiting for their clothes. You know, more clothes were sold. Look, free gift or service is so powerful.
[Tips] Launch low cost value-added service, which can activate customer repeat purchasing.

FOUR: Strengthen Your Customer Relationship
Customer does not need your weekly greeting, postcard or SNS sharing. It’s terrible that you think your customer can remember you. These actually seem to be annoying. So please do NOT waste time on this. The right way is to analyze where your customer stands and learn how to pay and gain. For example, you can prepare a small bunch of flowers for lady customer every week. It is not expensive and will show your sincerity. More importantly, your customer likes it. You can prepare high end liquor for gentleman customer. You should also make your customers feel honored while picking up them. Besides material needs, we have to pay attention to their spiritual needs, such as mutual communication of interests and useful suggestions.
[Tips] You have to pay before gaining what you want and focus on customer spiritual needs more.

FIVE: Enhance Brand Awareness Through Place
After initial access to local market, a commodity maker did a weird thing that they placed first retail store in high-cost downtown and near big brand: Chanel. At the very beginning, many people confused about it, but gradually understood the reason. Customers probably think that a brand neighboring Chanel must be high-end brand. The smart manufacturer quickly promote brand awareness with cost of opening a direct store.
[Tips] Your brand place in customers’ heart is determined by whom you stand nearby. You can build brand awareness by marketing big brands.

SIX: Sales Psychology
A lady loved to buy delicate tableware, but her husband denied due to high price. At this moment, the shopping guide stepped forward and said only one sentence. After that, the husband went to cash counter to pay immediately. Do you know the reason of the man’s quick turn? The shopping guide said “Your wife would not ask you to wash the expensive tableware.”
[Tips] Customers don’t buy because they have no pains. So we only have to explore what customers think and their pains.

The last important thing is: just do it now.

If you like this article, please kindly share it with your friends by copying link: http://www.nod-pcba.com/news/50-en.html

5 Must-sees of PCB Assembly Prototype

Many electronic product companies concentrate on research, design and marketing and outsource all process of electronic manufacturing. It comes to a lot of phases from product prototype to market launch, PCBA test is one of crucial phases. Even after PCB gerber files and BOM list are passed to PCBA manufacturer, we have to concern multi-aspects to ensure project cycle without any delay and avoid any risk of product introduction at marketplace.

Firstly, we have to analysis market positioning of electronic product, because different marketing strategies determine different design and manufacturing process. If we make high-end electronic products, we have to strictly audit components, assembly process and 100% simulate real production of batch order. If we make very common electronics with ripe schemes, we can conditionally accept PCBA manufacturing process, such as acceptance of replaced components, wide range of ICT test results etc.

Secondly, follow speed over cost during PCB assembly prototype. It generally takes 5~15 days from designed files sent to PCBA manufacturer to return, which can even be delayed to one month if for any process out of control. It is a pity if for slow project caused by human factors. In order to realize 5 days of PCB assembly prototype, we have to select electronic manufacturing manufacturer (enough manufacturing capabilities, good reputation, quality and services guaranteed) at stage of design, even at an extra cost of 50%.

Thirdly, electronic design engineers have to fulfill standards as possible as they can, such as leaving right heat dissipation vias, clear silk screen, regular components in BOM, and specific remarks of manufacturing process in gerber files. In this way, the communication time between PCBA manufacturers will be highly reduced and also wrong production caused by unclear design could be avoided.

Fourthly, we have to fully care about risks during logistics. Regarding PCBA packing, we can require EMS partner to use bubble pack or EPE to prevent any collision during transportation.

Fifthly, take maximization principle during determining quantities of PCB assembly prototype. Project manager, product manager, general manager, and marketing representatives are likely to have one in hand at least. Also, we have to think about the damaged boards during test. Therefore, it is suggested to make 10 PCBA boards at least.

Quality and speed are cornerstones of PCB assembly prototype. Good communication with EMS partner is catalyst. When electronic product companies have these concepts, then they can form good habits of design and stable relationship with PCBA makers. All is well, the project go as you imagine.

5 Crucial Aspects of PCBA Quality Control

The incremental need of electronic products propels rapid expansion of electronic manufacturing industry, involving upgrading technology deposition. With popularity of smart phone and wearable devices, there are refined and high requirements of manufacturing capabilities, which contributes quality control concerns of PCBA manufacturers. Here are 5 crucial aspects of PCBA quality control.

1. PCB Fabrication
There are huge many factors to impact PCB quality, the most important are laminate, dusty-free exposure and copper plating. Rather than factory facilities and environment, we should look into these quality controls. Laminate grade starts from A to C with big price difference. We also know the purity management of dusty-free plant through third-party documents. PCB copper plating has high requirements of consistency and uniformity, regular exchange management of solution and equipment maintenance. Also, copper plating process should be enhanced during practice of a variety of projects.

2. Components Sourcing
Original branding components are crucial to surface mounting technology, which can prevent batch defects from the source. Electronic Manufacturing Services (EMS) enterprises should set IQC (Incoming Quality Control) position to ensure all incoming materials in consistency and uniformity. IQC will manage sample-check of components shape, default value and error limit. Also, EMS enterprises should continually optimize components sourcing channels.

3. Surface Mounting Technology
During SMT process, EMS enterprises should confirm the solder paste in consistency and uniformity, set SMT programming properly to ensure high precision of IC and BGA assembly. It is necessary to put all PCBs to 100% AOI (Automatic Optical Inspection) and (IPQC, In-Process Quality Control). Meanwhile, we should fulfill strict management of tray and verify stack list.

4. PCBA Test
Test points are generally reserved by design engineer and relative test plan will be passed to PCBA manufacturer. Circuit voltage and current curve will be analyzed during ICT (In-Circuit Test) and FCT (Function Circuit Test). A collection of these results will be reviewed according to assigned test plan, then confirm the acceptance area, as well as customer future improvements.

5. Managing People
For PCBA manufacturers, well-equipped machines are only small part, the big part is the people management. Manufacturing management team should figure out scientific work flow and monitor the operation guides are handled properly.

In fierce competition of PCBA market, manufacturers should constantly optimize their internal quality management. The refined manufacturing management will adapt market demand and could be the lifeline of PCBA manufacturers.

3 Days Quick Turn PCB Assembly with Refined Process and Lowest Cost

Quick turn PCBA is a very important advantage of PCBA manufacturer. Under the same capabilities and quality assurance, a factory which has quick delivery of PCBA can win a lot of customers. And quick turn is one of the main factors that customer chooses a PCBA supplier based on.

Process of Quick turn PCBA

Client Placing Order → Components purchase and Incoming Quality Control → PCB Manufacturing→ Solder paste → SMT → Reflow Soldering → QC → DIP → Wave soldering → QC → PCBA test → Package & delivery

Lead Time of Quick Turn PCBA

The lead time of PCBA manufacturing could be shortened to 3 days for common components in stock, 7 days for some special components to be imported abroad and 20 days for components in production after placing order.

Charges of Quick Turn PCB Assembly

Except for charges of materials including PCB and components, SMT assembly, PCBA test, surcharge of quick services should be covered in the quote, which is approximately $300-500 USD and specifically depends on PCB design, BOM list and PCB assembly engineering process.
Click to get instant quote

Why We Can Fulfill Quick Turn PCB Assembly?

We take customer perspectives of PCB assembly manufacturing and assign project manager to push and track all manufacturing process since you place order to us.
1. Purchase components in stock through signed general agent: 2 days
2. Quick PCB manufacturing: 20 hours
3. Issue stencil and SMT assembly: 1 day
4. In circuit test and delivery: 1 day

NOD Electronics strive to be your reliable PCB assembly partner and are consecutively serving our customers with high quality of components bought from global branding electronic manufacturers and providing discount to our customers due to the advantages of scale purchase. A variety of customers witness our quality assurance and quick delivery.