2017年8月1日星期二

PCB printed circuit boards technical skills

PCB Board cutting system is an important part of PCB design. But involving Emery Board (of the harmful type), copy the line (a simple duplication), many designers are reluctant to engage in this work. Even many designers don’t think PCB Board cutting system is technical work and junior designers with little training to do the job. This point of view has a certain amount of universality, but like a lot of work, PCB Board cutting system still has some skills. If designers who master these tips can save a lot of time and also significantly reduce labor. Here we outline this knowledge.
LG-Wallpaper-TV.jpg

PCB Board cutting system concept
PCB Board cutting system is a process of getting schematic and PCB layout based on the original physical, with purpose of later development, which include deep test, installation of components, circuits and so on. Because they do not belong to the scope of PCB Board cutting system, so that only the presentation won’t go into details.

Process of PCB Board cutting system
1, removal of the original plate of the device.
2, original sheet scanned, receive graphic files.
3, surface and got the middle-tier.
4, the middle-tier scan and receive graphic files.
5, repeat step 2-4 until all layers are processed.
6, using special software to convert graphic files to electrical file—PCB drawing. If you have the right software, designers simply scan graphics again.
7, check and complete the design.

Tips for PCB Board cutting system
PCB Board cutting system (especially multilayer PCBA cutting system) is a time-consuming job that contains a large amount of repetitive work. Designers need to have enough patience and carefulness, otherwise mistakes occur. The key of cutting system is to use the right software to replace manual repetitive work, that saves time and is more accurate.

1, the scanner must be used in the cutting process.
Many designers are used directly in the PROTEL, PADSOR or draw lines on PCB design systems such as CAD. This is a bad habit. Scan the resulting graphic file is converted to the PCB file based, and checks later. Use of scanners can significantly reduce the difficulty and intensity of labor. If we can make full use of the scanner, even with no design experience can also finish PCB Board cutting system working.

2, single-direction grinding plate.
Some designers in pursuit of speed, select bidirectional plate mill (from the front and back surface worn away to the middle tier layer). In fact, this is very wrong. Because bi-directional grinding plates are very easy to wear, causing other damage and with predictable results. Outer layers of the PCB Board due to technology and copper foil, pads, etc are the most hard, middle-tier software. So the problem of the middle tier is more serious, and often cannot be polished. In addition, all manufacturers of PCB material, hardness and elasticity are different, quite difficult to wear.

3, good conversion software.
The resulting graphic file to the PCB file is the key of the whole work. By using a good conversion file, designers can easily convert graphic files to a complete job. As herein, EDA2000 is recommended.

How to Select EMS Provider?

With internet high and quick penetration to traditional manufacturing industries, it’s becoming easier to complete international purchasing. However, enough provider options make our purchase decision waste a lot of time and hard to finalize. Purchase managers always complain that the selected provider is out of expectations despite big efforts and costs. So, how to select our EMS (Electronic Manufacturing Service) provider?

ems-provider.jpg

Before an answer to this question, we have to understand a basic concept of cooperation. Long good cooperation is built on counterpart term, which includes enterprise size, manufacturing capabilities, services level and perspectives. Therefore, the provider selected by purchase manager at first might not be matched with project requirements, because there are big bugs of evaluation metrics of EMS providers. Now please go through some methods below.

Online Brand Awareness
You can catch up with rich information through EMS provider website and its social media pages. It’s hard to imagine that an EMS provider who has no official website or no related results on Facebook, Twitter, Linked In can offer you outstanding exporting services, and so does provider owning bad website (pure template, without any design thoughts and updates). Here are some evaluation terms.
1. Aesthetics design of website
2. Daily or weekly update of website
3. Brand clues or reports on Facebook, Twitter, Linked In
4. Any released video on YouTube.

Manufacturing Capabilities
It is supposed to view PCB manufacturing capabilities and PCB assembly capabilities of EMS provider on website. If the related info did not display on website, we could judge that this provider really ignored customer concerns. The sign of massive duplicate or contradictory content on website is also evidence for evaluating the provider manufacturing capabilities.

Quote Analysis
Never kill a potential good provider because of the initial quote, even 50% higher than your target, because providers quoted on basis of limited conditions and 100% unclear market positioning of your product, manufacturing process details and test plan. It actually exists that provider quoted higher thought about these requirements. But provider quoted low only aimed to earn regardless of product quality at first. Normally the initial quote is based on small batch order or sample order, so it is reasonable to see big price discrepancy.

Quality Control
Professional EMS provider places column of quality control on website, which includes metrics of manufacturing process and internal management. We can evaluate the provider on this base.

Approved Certificates
Provider with certificates such as UL, CE, RoHS, TS16949, ISO9001 is likely to fulfill quality and stability of PCB manufacturing and assembly services.

Professional Sales Man
You can recognize if you are facing a professional sales man during a short call by aspects such as fluent English, sophisticated business knowledge, good communication. This is another metric to evaluate EMS capabilities and experiences of the provider.

B2B platform is gradually coming to phase of scale returns. Enterprises who like to spend money on B2B platform can earn good rank in search results. Rather, Google, Yahoo and Bing are more likely to be trusted, because of sophisticated algorithms. Good rank company tend to have advanced manufacturing capabilities and outstanding services. So please carefully filter the search results of first 3 pages and handle above evaluation metrics. Good Luck.

If you like this article, please kindly share it with your friends by copying link: http://www.nod-pcba.com/news/72-en.html

How to get an instant PCB online quote?

Printed circuit board technology deposition makes industry highly developed. The PCB quote comes to be transparent. PCB industry profits come to be averaged. During past a couple of months, being impacted by current global economic recession, a variety of PCB makers have been withdrawing from this market, in particular the small business providing low manufacturing capabilities and without scale and outstanding services. Regarding online quote, currently many PCB makers can do this, because PCB is likely to be standard product, although the manufacturing process should be customized.

electronics-odm-process.png

To get an instant PCB quote, you have to provide some basic info: layer(s), size, laminate, surface finish, test requirements. But in terms of special requirements such as impedance, limited line spacing and width, blind via, buried via etc., engineer has to figure out the quote through more efforts.

During the process of calculating total cost, upstream laminate price is becoming transparent, so PCB makers only have to work out cost of labor, water, electricity, workshop rental, pollution management, wastage, machinery depreciation and then figure out the BEP (Break-Even Point). For online PCB quote, price of common double layer is about $50~90 USD/m2, but $90~100 USD/m2 for PCBs with special manufacturing requirements. Of course, the price discrepancy depends on processing, quality and services of the PCBs.

How to Ensure Quality of PCBA Manufacturing Process?

Before we start PCBA manufacturing, engineers have to review PCB gerber files and BOM list and try to figure out critical aspects of PCB manufacturing and SMT assembly process, such as copper plating, exposure, surface finish, solder paste printing, oven temperature curve etc. Now we start to talk about the quality control methods separately.

PCBA Flow Chart

1. Gerber files
Engineer has to confirm the specific parameters of PCB fabrication, including laminate thickness and dimension, copper thickness, surface finish, line spacing and width, other special requirements of impedance, blind via, buried via etc. The key points to ensure quality of common PCBs are uniformity of copper plating and circuit printing. In terms of impedance, engineer should calculate the value and place related manufacturing requirements to production team.

2. BOM List
Through the BOM list, we have to find out the most key components, including IC, display, connector etc. and their package method. We have to config advanced SMT mounter to do assembly for 0201 chips. At mean time, to confirm the timeline of purchase is huge important for whole PCBA manufacturing process. Some are out of stock and some should be imported internationally.

3. SMT Assembly Process
Before SMT assembly process, we have to inspect all incoming materials before they are placed onto production lines. Through checks of shape, dimension, value and brand, we can ensure all components are in compliance with the BOM list. Regarding some replacement component, we have to raise conversation with customer design engineers before making purchase decision. At stage of solder paste, engineer has to make sure of the laser stencil is OK and solder paste on PCB pads is in uniformity and good shape for first test board. High precision advanced SMT mounter is also a key to guarantee the quality. Subsequently, we have to set right oven temperature curve and use AOI to make online test. At last phase, ICT or FCT is necessary before delivery. We can find problems of soldering, vibration or test under severe conditions.

4. Team Management
Machine is one thing, man is the other. Perfect team management almost does everything for quality control of PCBA manufacturing process. We have to implant corporate culture into minds of everybody and the internal acceptance would impulse the team to take care of every job. Also, to make appropriate incentives is crucial.

PCBA manufacturing process is not so easy as above mentioned. It involves many technical aspects and professional operations. This article is mainly aimed to offer a rough sketch of whole PCBA manufacturing process.

How to choose a good PCB assembly factory ?

No doubt,quality and price is the most important factors which you should consider.

1.Quality consistence—-How to control the quality? With this question, you’d better visit the  workshop  (especially SMT workshop) that you may choose them as your factory. Because whether the SMT workshop is small or large, the production could be produce, but the different is the quality consistence. Anti-static, moisture-proof and dust-proof is the three basic rules in the SMT workshop(It’s also most important). And the workshop should record operations with ISO9000. I have went to some workshop, the window is open!!! And you even shouldn’t wear shoe’s cover, hat and ESD wrist strap!!! They are big risks which would cause the problems in quality. Even though the production looks ok as leaving factory. But the failure rate would be increase after user use it in several mouths.

2.Price—-The price making is base on the component choosing and the cost of processing. So how to choose the best component with low prices is the crux of the matter. Although PCB assembly already contain component sourcing, you’d better communicate with your manufacturer positively about component sourcing. It not just save your money, but also make sure your production quality too.

3.Cooperate with manufacturer directly. As someone said “the most important thing is to make sure they have the processes in place that you need.” You should kown, many factory don’t have the processed you need but they still want get this business. So they take over your business then outsource it to someone else. It may bring many troubles you would’t want meet.

How to Choice a PCBA Manufacturer?

PCBA (Printed circuit board assembly) is a very professional word in electronic industry. It is made up of SMT and DIP process. Printed circuit board is invented by Paul Eisler in 1936. In the year of 1948, PCB was first used in commercial purpose. PCB was not widely used until the 1950s. In PCBA global sales, there are many kinds of PCB substrate. Such as single layer PCB, double layer PCB, etc. What’s more, there are many complex PCB in global sales. And many of PCB makers provide PCBA service, they all want to provide PCBA global sales to grow their factories and companies.

International PCBA Industry Development

Now days, the output value of PCBA industry in the world makes up about one-third of the total output value of electronic industry. According to the output value, we can know that PCBA is the most important part in electronic trade.

How to Choice a Good PCBA Manufacturer

Electronic product everywhere, so we can see that PCBA supplier is an indispensable part in our lives. And the biggest PCBA maker country is China. Made in China is become more and more widespread. And China’s manufacturing industry is developing rapidly in recent years.
If someone want to do business with global PCBA trade, China’s PCBA suppliers may be the best choice.
When you want to find a good PCBA supplier, there are some useful steps to find them.
A. Surf the internet to find PCBA supplier factories websites.
B. Carefully read their websites. We need find there is a complete factory information and product information. If the website does not have a complete information, we can confirm that this company is not good enough.
C. Good website is very important, and the service is the same. We can call them, and make sure the supplier’s profession. If the customer services are very familiar with their business, then, we can select them.
Here are some items we need notice. The first one is make sure the PCBA supplier can wonderfully accomplish your task on time. If it is possible, factory inspection can help you ensure the supplier’s good or bad. If we want to do the PCBA global sales, the most important thing is keep out scammers.

How to Calculate SMT Assembly Price?

Almost SMT industry insiders know how to calculate SMT assembly price, which is becoming transparent and easy to get. However, we have to catch up with definition of “spot”. Different companies use different calculation methods, but the total SMT assembly fees will be same with little discrepancy in terms of same PCB board.

The main purpose of SMT assembly is to place SMD components onto PCB pads correctly and in high precision. Some of companies take one pad as a “spot”, and some take two pads as a “spot”. Let us take one pad as a “spot” for example in this passage. Actually, we only have to figure out the total quantities of PCB pads. But, we will meet some special components, such as inductance, big capacitor and IC, which should be calculated separately. According to experience, there are 10 spots for inductance. 50% discount of IC pins (for example, there are 20 spots for 40 pins IC). In this way, we can easily work out the total quantities of PCB pads until now.

Next, we have to confirm the unit price. In the marketplace, there is different price for each spot, generally from 0.01~0.03 RMB/spot, which is determined by difficulty and quality of PCB assembly process. For cheap price, there are probably no AOI/ICT test and incoming material inspection. So the quality of batch order would be hardly to guarantee. In this case, there will be big potential risk of product uniformity and stability in the future. For a little bit higher price, the SMT manufacturer would like to control good quality process and provide better delivery lead time and outstanding services. Therefore, customers should select the SMT assembly manufacturer on basis of their product positioning and technical requirements.