2017年7月26日星期三

Method and Procedure for PCBA Failure Analysis

To get PCBA failure analysis reasons:

  • To accept the failure information feedback and analysis request from site and customers
  • To remark what customers complain
  • Model, Batch Number, Failure Rate and the proportion
  • Appearance inspection, production information
  • Failure mode phenomenon, parameter value
  • The difference between passed products

The failure analysis of PCBA has the following three reasons:

When PCBA appears problem, it must fist check the basic conditions of manufacturing process, also
PCBA Failure Analysis

1/Materials Problem:
These not only include chemical materials of sold paste, such as flux, oil, tin, cleaning materials. Also cladding materials of PCB, such as anti-oxidation resin, temporary or permanent anti-welding ink and printing ink and so on.
2/Poor solderability
This involves all solder surfaces, like parts ( including surface-attached parts / SMT parts), PCB and plating drilling, which must be taken into account.
3/The deviation of manufacturing equipment
Including the deviation of machine equipment and maintenance and the external factors, temperature, conveyor belt speed and angle as well as the depth of soaking, etc; and the machine is directly related to variable. In addition, the external factors such as the ventilation, the reduction of air pressure and the conversion of voltage, etc, which must also be included in the analysis.

PCB Etching: Outer Layer and Inner Layer Etching

The typical process of PCB processing is using "Pattern plating Method". First of all, to retain the needed copper part of the outer layers, that is, to pre-plate a layer of tin plating on the part of circuit, then etching the rest of the copper foil in a chemical way is called etching.
Outer Layer: developing  → two copper tinned → peeling → etching → stripping tin
Inner Layer: developing → etching → peeling
PCB Etching

There are two layers copper on the PCBA board, only one layer of copper must be etched off in the outer etching process, and the rest will form the final circuit.
There is another method in the process of printed circuit board outer layer circuit, which is to use photosensitive film instead of metal coating to resist corrosion.
At present, tin or lead tin is the most commonly used corrosion layer, used in the ammonia etchant of the etching process. Ammonia Etchant is a commonly used chemical liquid, and tin or lead tin doesn’t occurs any chemical reaction. Ammonia Etchant mainly refers to ammonia / ammonium chloride etching solution. In addition, ammonia / ammonium sulfate etching liquid can also be bought in the market.
The line width of inner layer is generally larger, so the Ring is enough; The line of outer layer is generally more dense and space is not enough, so this time it is necessary to find ways to achieve the purpose of making line in the small space. 

The Importance of PCBA DFM Inspection and Its Guidelines

Design for Manufacturability (also sometimes known as design for manufacturing or DFM) is the general engineering practice of designing products in such a way that they are easy to manufacture. DFM describes the process of designing or engineering a product in order to facilitate the manufacturing process in order to reduce its manufacturing costs. DFM will allow potential problems to be fixed in the design phase which is the least expensive place to address them.
PCBA DFM

As a PCBA Designer you have to manage a variety of different requirements and expectations. There are electrical, functional, and mechanical aspects to consider. In addition, the PCB layout has to be produced in a timely manner, with the best possible quality, at the lowest possible cost. And through all of these requirements, you also need to factor in DFM (Design for Manufacturability). It’s a big part of the PCB design process, and one which can frequently cause problems if not done properly.

Top 11 DFM Check Guidelines

  • Material Selection
  • Impedance
  • Via Structures
  • Trace and Space
  • Drills and Padstacks
  • Surface Finish
  • Via Treatments
  • Mechanical Features
  • Thieving (External)
  • Thieving (Internal)
  • Even Copper Distribution on Copper Layers

HS Code Summary of Various Circuit Board

Custom code is HS encoding, is the abbreviation for coding coordination system. Nowadays, society is a global trading society, therefore, all types of goods will have a HS encoding. We will make all kinds of HS commodity code of circuit board into a list, convenient for you to view.
Circuit Board HS Code

HS encodingProducts NameMeasurement unitExport rebate rate(%)
8534009000PRINTED CIRCUIT BOARDBlock / KG17%
8442400001Circuit board (plate making machine parts) KG15%
8442400001Circuit board (plate making machine parts) KG15%
8534001000PRINTED CIRCUIT BOARD (No component 10 layers)Block / KG17%
85372090001000PCS CIRCUIT BOARDKG17%
85372090002000PCS CIRCUIT BOARDKG17%
85372090001200PCS CIRCUIT BOARDKG17%
8534009000FLEXIBLE PRINTED CIRCUITBlock / KG17%
The original link: http://www.nod-pcba.com/news/473-en.html

PCBA Definition: Quickly Understand the 52 Definition of PCBA

Different industries have different understanding of PCBA, this page is all about the definition and interpretation of PCBA.
PCBA Definition



1
PCBAPrint Circuit Board Assembly27PCBAPollution Control Board Assam
2PCBAPima County Bar Association28PCBAPollution Control Board of Assam
3PCBAPreliminary Cost Benefit Analysis29PCBAPlain City Business Association
4PCBAPrinted Circuit Board Assemblies30PCBApremier commercial bancorp announces
5PCBAPacific Center for the Book Arts31PCBAPierce County Biodiversity Alliance
6PCBAPrinted Circuit Boards Assemblies32PCBAPulaski County Baptist Association
7PCBAPepsi Cola Bottlers Association33PCBAPrinted Circuit Board Assembled
8PCBAPitkin County Bar Association34PCBAPierce County Breastfeeding Alliance
9PCBAPipa Club Buenos Aires35PCBAPlymouth County Bar Association
10PCBAporcine cerebral basilar arteries36PCBAProfessional Canine Breeders Association
11PCBAproteolytic clipping bandshift assay37PCBAPalmyra Civic Baseball Association
12PCBAPeace Country Bison Association38PCBAPark City Balloon Adventures
13PCBAPublic Competitive Bidding Act39PCBAPeabody Coal Broken Aro
14PCBAperchloro-3-butenoic acid40PCBAPhysically Challenged Bowhunters of America
15PCBApentachloro-3-butenoic acid41PCBAPolk County Builders Association 
16PCBApolymerase c bypass mutation42PCBAPunjab College of Business Administration 
17PCBAPremier Commercial Bank Arizona43PCBAPortable Clinical Blood Analyzer
18PCBAPasco County Bar Association44PCBAPorter County Builders Association 
19PCBAPaulding County Builders Association45PCBAPeoria County Bar Association 
20PCBAPueblo County Bar Association46PCBAPrivacy Certification for Business Associates
21PCBAPacific Center for Book Arts47PCBAPacific Coast Baptist Association
22PCBAParkville Carney Business Association48PCBAPhiladelphia Contract Bridge Association
23PCBAPlacer County Bar Association49PCBAPierce County Beekeepers Association 
24PCBApension contribution balancing account50PCBAProsen Center for Business Advancement (University of Dallas, Texas)
25PCBAPoint Clark Beach Association51PCBAPensacola Charter Boat Association
26PCBAPortable Clinical Blood Analyser52PCBAPostgraduate Certificate in Business Administration
The original link:http://www.nod-pcba.com/news/472-en.html

2017年5月31日星期三

How to Ensure the Electronic Components is the Original Authentic in the PCBA Machining?

It needs to ensure the products quality during the PCBA processing, not only control the processing process, but also control to the components of the source, to ensure that the electronic components are original authentic. Now there are some unscrupulous businessmen through the purchase of counterfeit brand components on the market, and then sell with high profits, resulting in some of the PCBA factory damage.So how to ensure the electronic components of the original authentic?
Electronic Components

To ensure that the electronic components in the PCBA machining process is original, which can be controlled from the following three methods.

One/see the qualification of agent

Now,electronic components agents, trade quotient numerous, quality and price level in the sales maket is uneven, to ensure that the electronic components of the original authentic, which can through the enterprise's official website to see whether there is an agent with qualification, and purchased through formal channels.
Generally, agents have the qualification and controled by the original factory, to ensure that the source of electronic components is original

Two/see reputation and credibility

Generally, the distributors and traders are in good reputation and credibility, their components are not bad. Because an enterprise's reputation and credibility of the accumulation is to go through a very long time, accompanied by recognized brand manufacturers, basically their components are not counterfeit.

Three/incoming inspection of material

In addition to the above two steps, there is a very important step is the incoming inspection of components.The normal PCBA processing manufacturers to just buy the components with incoming inspection, sampling components or full inspection, to ensure the quality of the components.
PCBA factory in the purchase of electronic components,also need pay attention to the top mark, the components of the production batch number, and other related components to beta appearance and physical details, in order to ensure that the electronic components is the original authentic.

Is it Necessary to Audit the PCBA Processing Factory ?

It is very necessary for electronic product R&D to audit the PCB assembly factory. A electronic products from the original PCB substrate to the half finished PCB board, which involves many processes and the manufacturing process is complex, high requirements for process control,while the general factory is difficult to do. It is also a necessary process for the PCBA manufacturer to audit the factory.
PCB Processing Factory

Electronic products R&D audit the PCBA processing factory, which is mainly including the factory equipment, documents, basic introduction workshop with 7S management system and the company'review.

First/Equipment

The Equipment in a PCBA processing factory is on behalf of a manufacturer's strength in certain circumstances. It needs a lot of equipment machines and more advanced equipment for a PCBA board manufacturing and process, which can represent to process more complex board.You can determine the strength of the PCBA process by reviewing the equipment in the factory.

Second/Documents

The manufacturing process of PCBA processing is complex, so general PCBA processing plants have SOP position, work instructions and other relative documents, which is the guidance on the conduct of employees, to ensure that the manufacturing process is under strictly control, to improve the quality of the products. To review the factory can also determine wheather the factory is professional standardized.

Third/The workshop with 7S management system

7S management system is a management system of modern factories, which can eliminate all kinds of bad imagination during the manufacturing process, to achieve standardized management.
  • 1/Seiri
Definition: the distinction between use and useless to remove the useless.
Objective: to make use of "empty space"
  • 2/Seiton
Definition: the things in accordance with the provisions of the positioning, quantitative neatly and clearly marked.
Purpose: don't waste time looking for things
  • 3/Seiso
Definition: removing the dirt in the workplace, and prevent pollution.
Objective: to eliminate the "dirt" and keep the workplace clean and bright.
  • 4/Seiketsu
Definition: to make the above 3 practics in institutionalize, standardize, and sustain the implementation 
Objective: to maintain the results, and show the "abnormal" lies through the system
  • 5/Shitsuke
Definition: all in accordance with the provisions of act from the mind to form good habits.
Objective: to change the "hostage", pay attention to the cultivation of working earnest habit.
  • 6/Security
A,to make correct operation flow, configure the appropriate staff to monitor the indication function in management
B,timely reporting and eliminate substandard of the factors safety regulations
C,to enhance safety awareness education personnel
D,signed letters of responsibility for security
Objective: to predict the danger, so at the end of it begining
  • 7/Save
Reduce the manpower, cost, space, time, inventory, material consumption and so on
Objective: to develop a habit of reducing cost, strengthen the operation personnel to reduce waste awareness education.

Fourth/Company presentation

Finally, it also need to understand the basic introduction of the company, what are the types of customers, whether their own matching products, which are necessary to understand.
Generally, as a formal company, they will audit the PCBA processing factory ,and even year by year. We can fully understand the process capabilities through the auditing the PCBA processing factory.