2017年8月7日星期一

Precision A Hallmark In PCB Design And Manufacture

For businesses looking to outsource their PCB design and manufacture services, there are a lot of options out there at the moment. The overseas market is still flooded with numerous low cost/low quality manufacturers but their appeal is beginning to wane. Companies are finally starting to realize that with most of these super-cheap foreign manufacturing centers, quality and precision are hard commodities to come by.
However, the market is - as always - adjusting around us whether we like it or not. The demand for precision-tooled PCB designing and PCB manufacturing has made reshoring an increasingly popular option. Why? Because you need quality products to survive in today's market, quality you're unlikely to find overseas.
PCB manufacturing

Consumers Are Savvier Than Ever

The Internet has led to a revolution in how consumers buy things, and all manufacturers can do is try to keep up. According to this recently-released study, nearly half of consumers expect to use a mobile device in conjunction with their shopping – looking up deals and reviews – meaning that if a product is shoddy, they'll know about it.
Further, while only about 1/5 of consumers say they're out to buy the bestproduct, regardless of price, take a look at consumers' wish lists for this holiday season. The most commonly-cited brands – including Canon, Apple, and Sony – come from companies who are all known for the high quality of their products.
Combine that with their increasing willingness to skip in-person shopping altogether and just do it online, and consumers are sending a clear message to consumers: They have the intel, they have the power, and they're going to use it to get the best products with the best prices.
You Need Precision in Your PCB Design and Manufacture
In short, the days of the consumer electronics boom are just about over. Everyone's lives are filled with gadgets today – for better or worse – and consumers can afford to be more discerning. That's why you need good engineering design services and PCB design and manufacture services aimed not at producing products at the cheapest rate, but at creating affordable devices that still meet high standards of quality and precision.

Look for a manufacturer with:

  • In-house design services, which can often optimize your designs to require fewer components, giving you higher quality with lower per-unit prices.
  • An emphasis on high complexity orders: Modern facilities that can handle a higher range of models and customization is going to have the facilities necessary to meet whatever demands you have for your product's production.
  • Robust testing services, both before and during production, to ensure you don't commit to selling a product before you can be certain it will stand up to expected use without any design flaws surprising you after the fact.
  • Database-driven supply chain management, ensuring that only genuine, authentic components make their way into your products. Counterfeit electronics are becoming a serious concern, and much of that is due to unsupervised foreign manufacturers cutting corners and pocketing the difference.
  • A full range of standards and certifications, demonstrating their recognized proficiency in fields such as aerospace and medical manufacturing, giving you more confidence that their work is of the highest quality.
Precision and quality should be the watchwords when you search for PCB design and manufacture services. Don't gamble your company's future on the lowest bidder. Spending a little extra up-front to produce a product you can be proud of will do far more to assure your company's long-term returns.

Important Elements That Add Up To Great EMS Electronics Design

EMS Electronics design becomes more and more difficult to do well, as we continue to push both density and speeds higher when it comes to circuit design.  High-RF designs require highly precise and controlled manufacturing to produce boards capable of standing up to lengthy use, and with sufficiently low failure rates.
Important Elements That Add Up To Great EMS Electronics Design
EMS

1 - Weave Density

Many newcomers to modern board design are surprised to learn that modern PCBs are layered.  In fact, they can have dozens of layers, up to 50 or more.  They alternate between high-resistance and low-resistance materials, so that multiple circuit lines can be stacked on top of each other.  The high-resistance materials are what keep those lines from getting crossed by creating a barrier.
Generally, these materials are fiberglass and resin, using fiberglass weaves on top of resin surfaces.  The issue here is that low-cost manufacturers, especially overseas, will skimp on the fiberglass.  Their products have a very loose weave,  leaving gaps with little fiberglass conducting the electrical current.  This degrades performance, as well as introducing syncronization issues due to the uneven speed of line transmission.

2 - Precise copper etching

In many cases, the "adding" of copper lines to a PCB is actually a subtractive process:  The board starts with a full layer of copper, which is then etched away to leave only the lines and connector areas needed for the circuit design.  It's crucial that these lines be as smooth as possible.  Jagged edges or uneven etching on the copper reduce reliability and introduce extra RF interference when the board is placed under a high load.
In many cases, this is plainly visible, even to the naked eye.  Take a look at one of your boards sometime.  If the edges of the copper wiring look jagged, wavy, or otherwise not-smooth, you may want to start looking for a manufacturer with higher-quality equipment.

3 - Prototyper vs Manufacturer Mismatches

This is another issue we see crop up more and more:  When a company is using Manufacturer A to create prototypes and Manufacturer B to mass-produce the final build, it is absolutely essential that B be able to provide the same level of precision and worksmanship that A can.  We've seen far too many situations where a great prototype has given way to a poor product, because the full-scale manufacturing run couldn't match the prototype.
Frankly, the best solution here is usually just to go single-source.  When a company has the capability to go straight from prototyping to a full run, that eliminates guesswork as well as the redundancies involved in hiring two separate manufacturers. 

4 - Cleanliness / Ionic materials

When dealing with high-RF EMS electronics design, cleaning the board after production should involve more than just spraying it with water and hoping for the best.  Even microscopic specks of ionic materials - natural insulators - can have significant impact on the final speed and reliability of PCBs.
Higher-quality manufacturers have equipment which tests the conductivity of the board throughout the cleansing process, which allows them to know when a board is sufficiently clean.  Without this sort of qualitative assessment, the cleaning process becomes guesswork.

2017年8月4日星期五

SMT Solder Paste Screen Printer Machine for Solder Paste Screen Printing

A Solder Paste Screen Printer for SMT is needed to screen solder paste onto the printed circuit board (PCB) before placement of surface mount components.
Solder Paste Screen Printer for SMT have been widely used in electronics by the PCB industry for screen solder mask. This equipment / machine has also been extensively used in the hybrid industry for screening solder paste. However, different equipment is used for the screening of solder mask and solder paste. The cost of screen printers can vary widely, depending on their degree of automation and the size of boards they can handle.
SMT

Solder Paste Printing Systems are available in three configurations: manual, semi-automatic and fully automatic. The machine can be table mounted, stand-alone, or in-line. Many semi-automatic printers offer manual vision alignment capability, while fully automatic printers offer automatic vision alignment.

Stencil Vs Screen Printing

Stencils are preferred over screens because of better image accuracy, volume control, and longer service life. Screens are not in common use today. Stainless steel is the most common stencil material. Other choices include brass 42 and molybdenum. Chemical etching is commonly used to fabricate stencils.
Several other methods have been developed to aid fine pitch applications including plating (electroless nickel), electrodeposition, laser cutting, and electropolishing. Stepped thickness stencils have been developed to apply various thickness of solder paste to different component types on a substrate. Fine pitch printing require very accurate alignment of the stencil apertures to the land patterns.

Soldering Station Guide

About Soldering Station

A soldering station is a soldering tool with a separate station to control temperature and a soldering iron. A soldering station can be either analog or digital.
A soldering station is an electronic tool for hand soldering of electronic components onto a  printed circuit board . It consists of a station or a unit to control temperature and a soldering iron that can be attached to the station unit. Most soldering stations have temperature control and are mostly used in electronics PCB assembly and manufacturing units. They are also used for mass repairing of circuit boards. Most genuine service centers also use these temperature controlled soldering stations for repair and rework jobs.
soldering station

Digital and Analog Temperature-Controlled Soldering Stations

A soldering station can be either analog or digital. Analog units have knobs to control (increase or decrease) temperature. They don’t have any display to show the current set temperature. The temperature setting in these units is not very accurate. On the other hand, digital units have settings to control the temperature digitally. They also have a display that shows the current set temperature. These units offer better accuracy but are little expensive than their analog counterparts.

ESD-Safe and Non-ESD Safe Soldering Station

Again, a soldering station can be either ESD-safe of Non-ESD safe. ESD stands for Electrostatic Discharge (the rapid transfer of charge that can occur when objects at different potential come close to each other). An ESD-safe soldering station means that no static charge will be built on the station or the iron. Special material is used to make these units. These tools are also well grounded to discharge any unwanted electricity into the ground. An ESD-safe soldering station is a must for most latest electronic gadgets and mobile phonesbecause most of these gadgets have electronic components that are very sensitive to static charge and can easily get damaged. ICs and semiconductors are very sensitive to static charge.

SMT Solvent Cleaning Equipment / Machine To Clean Flux with Water

After soldering, the electronic assemblies must be cleaned to remove excess solder flux. The subjects of flux and cleaning are closely intertwined. The selection of solvent and cleaning equipment depends of the flux used and the cleanliness requirements.
The cleaning process has received considerable attention because of efforts to eliminate chlorofluorocarbons (CFCs) and other ozone depleting chemicals. CFCs were banned at the end of 1995.
SMT

Electronic  printed circuit board  assemblies are presently soldered using various fluxes and solder paste whose residues may require cleaning after the soldering process. The use of rosin-based fluxes has mandated a cleaning stem for any manufacturer who performs bed-of-nails testing, because the rosin acts as an insulator and, additionally, it can transfer sticky residue to the problems, making them ineffective for electrical testing.
Military specifications have always required cleaning of Mil-approved RMA or RA fluxes and pastes; with ionic contamination testing to assure that the remaining residues do not deteriote the assembly. Others require cleaning of rosin flux for cosmetic reasons. Cleaning is also required prior to conformal coating. So those who must use rosin pastes or flux use alternate solvents (non-ozone depleting solvents), semi-aqueous solutions, and saponifying detergents.
In most commercial applications, water soluble solder pastes and fluxes are used. They are generally cleaned with de-ionized water. Any many electronic companies have chosen to use low residue, no-clean pastes and fluxes that require no cleaning at all.
No matter which alternative is chosen, there is a cost associated with new equipment and material purchases for the chosen alternative. Numerous cleaning technologies are available. One must choose the cleaning process based on the product being built and the cost, performance, and environmental impact of the options. The use of alternative cleaning methods must be coupled with an understanding of the flux type being used.

Wave Soldering: Equipment & Process

Wave soldering is the most widely used method in electronics industry for soldering through-hole electronic components. Components glued to the bottom of a mixed-technology PCB require wave soldering, although the required wave geometry is different from that for through-hole electronic components. In the most common wave soldering geometry, the dual-wave type, one wave is turbulent and the other wave is smooth, as in conventional technology soldering.
wave soldering

The need for wave soldering equipment can also be met by simply retrofitting the conventional solder pot with the dual pot – at a small fraction of the cost of a new machine. A completely new machine is not necessary.
Another wave geometry for  printed circuit board  Assembly that is popular for surface mounting in SMT is a vibrating single wave known as the omega wave. Like the dual wave geometry, it helps in reducing solder defects. The agitation provided by the dual or vibrating wave dislodges trapped flux gas that forms during wave contact and forces solder into areas with poor wetting angles. Proper component orientation is also very important.
Some electronic companies have successfully used drag soldering equipment and techniques. Ideally, the wave or drag soldering process should be limited to soldering ceramic surface mount resistors and capacitors. Small outline transistor (SOT) components are difficult to wave or drag solder (Check: Hand soldering of SMD).
Wave and foam fluxers are generally used to apply flux to the board. Spray Fluxers are being used to apply very controlled amounts of flux, especially when no-clean fluxes are used. The development of an appropriate solder profile is important for best results.

SMT Reflow Soldering Equipment / Machine

A reflow soldering equipment / machine is the second major equipment after pick-and-place machine in any SMT line.
There are many reflow soldering methods and each method has advantages and disadvantages. Equipment cost, maintenance cost and yield are some of the leading decision factors.
The most widely used reflow processes in electronics are: vapor phase and infrared.
SMT Reflow Soldering

Vapor phase process is very versatile and it can be applied to assemblies of any shape. Many models of phase process are available in both batch and in-line types. The capital costs of the vapor phase and infrared processes are comparable but the operation cost may be higher for vapor phase.
Infrared equipment has been widely used in the hybrid industry, but at a much higher temperature, for firing thick film deposits on ceramic substrates. The same equipment was initially tried for reflow soldering on glass epoxy substrates with terrible results: burning, charring, and warpage of boards. Now the electronics industry has made tremendous progress in redesigning heating elements to eliminate earlier problems.
The development of a reflow profile for each product is key to obtaining optimum yields no matter which reflow system is used. With an appropriate profile, any of the systems will work.